玻璃钢拉挤模具 FRP Pultrusion mould  features

1 High hardness, long service life, high surface finish of the cavity, can meet the needs of different resin pultrusion products;

2.40Cr mould features: high finish, low extrusion resistance, suitable for mass production of unsaturated resin products;

3, P20 mold features: the overall hardness of the mold is high, the polishing effect is obvious, suitable for the mass production of polyurethane, vinyl and other resin products with high friction coefficient;

4, 38CrMOA nitriding mold features: high surface hardness, wear resistance and fatigue strength, and has good heat resistance and corrosion, mainly suitable for mass production of unsaturated resin products, mold life is longer;

5, Cr12 quenching mold features: the overall hardness of the mold is high, higher finish, suitable for mass production of conventional products

FRP pultrusion die, which is made based on our customers' requirements.

If you need to make such dies, please contact us and  provide us drawings.

We provide customized service.

The dies can be designed and manufactured according to customers' requirements, e.g. drawings or samples.
The material is also changeable: P20\42CrMo\5CrNiMo and etc.
Usually the die length is 900mm - 1000mm.

The machining accuracy: linearity can reach 0.001, roughness of surface: 0.025; HRC >55.